Products | Teledyne Monitor Labs

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports, either locally or by remote connection.

The Model T200H comes with NumaView™ Software. NumaView™ Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView™ Software.

The following table provides a list of items that need regular maintenance to ensure your product remains in good working condition.

Maintenance

ITEM	ACTION	FREQUENCY	CAL CHECK	MANUAL SECTION
Particulate Filter	Change filter	Weekly (or as needed)	No	6.3.1
Verify Test Functions	Review and evaluate	Weekly	No	6.2; Appendix C in manual
Zero/Span Check	Evaluate offset and slope	Weekly	--	5.4, 5.6, 5.8
Zero/Span Calibration	Zero and span calibration	Every 3 months	--	5.2, 5.5, 5.8, 5.9
NO2 Converter	Replace converter & check efficiency	Every 3 years or if conversion efficiency <90%	Yes if CE factor is used	--
External, 2-stage Zero Air Scrubber (Optional)	Exchange chemical	Every 3 months (or as needed)	No	3.5.3.2
Reaction Cell Window	Clean optics, Change O-rings	Annually or as necessary	Yes	6.3.5
Air Inlet Filter Of Permeation Dryer	Change particle filter	Annually	No	6.3.1, 6.3.2
Pneumatic Sub-System	Check for leaks in gas flow paths	Annually or after repairs involving pneumatics	Yes on leaks, else no	7.5.1, 7.5.2
All Critical Flow Orifice O-Rings & Sintered Filters	Replace	Annually	Yes	6.3.6
¹Pump	Rebuild head	Annually	Yes	6.3.3.1
Inline Exhaust Scrubber	Replace	Annually	No	--
PMT Sensor Hardware Calibration	Low-level hardware calibration	On PMT/ preamp changes & if 0.7< slope >1.3	Yes	7.6.4
1 A pump rebuild kit is available from Teledyne API's Technical Support, including all instructions and required parts. (the pump part number is on the label of the pump itself)

Maintenance​​

Maintenance